Contact us for:
The process to cut the leveled steel coils into sheets in a cut-to-length line meeting flatness standards and following adequate packaging and handling for transportation
The process to uncoil and slit a master coils down in smaller coils of a specific width and or weight. Adequate packaging to ensure integrity of coils for handling and transportation.
Our cutting-to-length equipment are among the most modern in steel processing.
Carbon steel sheets, thin and thick, with final thickness obtained by hot rolling process, in continuous rolling mill. Steel for general purposes, widely used in construction, transport, machinery, car parts, furniture industry, tubes, agricultural implements and many others.
Characteristics | Minimum | Maximum |
---|---|---|
Thickness | 1,50 | 13,00 |
Width | 500,00 | 1600,00 |
Length | - | 9000,00 |
Remark: Other size by agreement. *
Tolerances on DimensionsSteel sheets (thickness minus/equal to 5,00 mm) | Thickness | NBR 11888 - Table 5 (Normal) |
Width | NBR 11888 - Table 8 (Normal) |
|
Length | NBR 8269 - Table 7 (Normal) |
|
Steel sheets (thickness plus 5,00 mm | Thickness | NBR 11889 - Table 5 (Normal) |
Width | NBR 11889 - Table 7 (Normal) |
|
Length | NBR 8269 - Table 6 (Normal) |
Remark: Special tolerances by agreement *
Technical SpecificationsCold-rolled sheets can be used in a wide range of applications, mainly in the automobile industry, appliances, electric motors, compressors, packaging, furnishing, civil construction, decoration.
Size of cold rolled steel sheets and coils supplied by Panatlântica as described on the following table:
Characteristics | Minimum | Maximum |
---|---|---|
Thickness | 0,30 | 3,00 |
Width | 500,00 | 1600,00 |
Length | - | 4000,00 |
Remark: Other size by agreement. *
Tolerances on DimensionsThickness | NBR 11888 - Table 11 (Normal) |
Width | NBR 11888 - Table 13 (Normal) |
Length | NBR 8269 - Table 6 (Normal) |
Remark: Special tolerances by agreement *
Technical SpecificationsHot rolled steels sheets pickled and oiled with final thickness obtained by hot rolling process in continuous mill (LTQ).
Pickling steel is obtained passing the coils through an acid to remove discoloring surface oxide layer or scale occurred during hot rolled process, and then rinsing and oiling the metal to reduce the formation of rust.
Characteristics | Minimum | Maximum |
---|---|---|
Thickness | 1,50 | 9,50 |
Width | 500,00 | 1600,00 |
Length | - | 9000,00 |
Remark: Other size by agreement. *
Tolerances on DimensionsSteel sheets (thickness minus/equal 5,00 mm) | Thickness | NBR 11888 - Table 5 (Normal) |
---|---|---|
Width | NBR 11888 - Table 7 (Normal) |
|
Length | NBR 8269 - Table 6 (Normal) |
|
Steel sheets (thickness plus 5,00 mm) | Thickness | NBR 11889 - Table 5 (Normal) |
Width | NBR 11889 - Table 7 (Normal) |
|
Length | NBR 8269 - Table 6 (Normal) |
Remark: Special tolerances by agreement *
Technical SpecificationsSteel plates produced in reversible mill used in a variety of applications:
Characteristics | Minimum | Maximum |
---|---|---|
Thickness | 6,30 | 150,00 |
Width | 2000 | 2440 |
Length | 2000 | 12000 |
Remark - Other dimensions under consultation*.
Tolerances - Brazilian StandardsThickness | NBR 11889 - Table 4 (Normal) |
Width | NBR 11889 - Table 7 (Normal) |
Length | NBR 11889 - Table 8 (Normal) |
Other tolerances by agreement*.
Offer an anticorrosive coating and might be found in parts of automobiles, air ductwork, roofing and siding, garbage cans, metal building panels, electrical boxes,casings for light fixtures,grain bins, gutters, interior cabinets, or appliances.
Characteristics | Minimum | Maximum |
---|---|---|
Thickness | 0,30 | 2,70 |
Width | 500,00 | 1600,00 |
Length | - | 4000,00 |
Remark: Other size by agreement. *
Tolerances - Brazilian StandardsThickness | NBR 7013 - Table 2 (Normal) |
Width | NBR 7013 - Table 3 (Normal) |
Length | NBR 8269 - Table 6 (Normal) |
Other tolerances by agreement*.
Technical SpecificationsRemark: Other standards by agreement.*
Also known as strips or slitter, Panatlântica coils steel strips have precise cuts and firm rolls.
We produce a wide range of sizes, in standard thicknesses of hot and cold rolled, galvanized, Galvalume, pre-painted and hot rolled pickled and oiled materials.
Other specifications by agreement *.
We supply steel strips in coils for segments like household utilities, furniture components, appliances, auto parts, components for electric motors, hardware, hand tools, parts for agricultural machinery and equipment, structures, among other uses.
Characteristics | Minimum | Maximum |
---|---|---|
Thickness | 0,30 | 3,00 |
Width | 9,50 | 1600,00 |
Special sizes under consultation*
Tolerances on DimensionsThickness | NBR - 11888 Table 11 (normal) |
Width | NBR - 8269 Table 3 (normal) |
Remark: Special tolerances by agreement *
Characteristics | Minimum | Maximum |
---|---|---|
Thickness | 1,50 | 6,30 |
Width | 9,50 | 1600,00 |
Remark: Other size by agreement. *
Size TolerancesThickness | NBR - 11888 Table 5 (normal) NBR - 11889 Table 5 (normal) |
Width | NBR - 8269 Table 3 (normal) |
Remark: Special tolerances by agreement *
Technical SpecificationsThe rerolled steel strips can be supplied with special thicknesses, and tailored with special tolerances and mechanical properties for each application, meeting the requirements of national and international standards.
Characteristics | Minimum | Maximum |
---|---|---|
Thickness | 0,25 | 6,00 |
Width | 9,50 | 350,00 |
Length | Coils |
Remark: Other size by agreement. *
The Gravatai unit has its quality management system certified by NBR ISO 9001 since 1997, conferred by the DNV - Det Norske Veritas system.
In 2018, the transition to NBR ISO 9001:2015 was carried out including the scope:"Commercialization and provision of services in flat steel: in coil, unwinding in plates, strips in coil and blanks, and re-rolled steel."
PANATLANTICA SA has as its main purpose to maintain itself as one of the largest independent distributors of flat steel in the Southern Region of Brazil, seeking the continuous improvement of its products, services and quality management system, aiming at meeting the requirements of its shareholders, customers, employees, external suppliers and company suppliers.
Delivered sizes as customer requirements. Making the manufacturing process more agile with reduced losses.
Type | Thickness | |
---|---|---|
Minimum | Maximum | |
Cold Rolled | 0,30 | 3,00 |
Coated | 0,35 | 2,70 |
Pickled | 1,50 | 9,50 |
Hot Rolled | 1,50 | 16,00 |
Thickness | Cold Rolled | NBR 11888 - Table 11 (Normal) |
Coated | NBR 7013 - Table 2 (Normal) |
|
CSN Galvalume | ASTM A 924 |
|
Hot Rolled and HR P & O | NBR 11888 - Table 5 (Normal) |
|
NBR 11889 - Table 5 (Normal) |
||
Width | All | NBR 8269 - Table 5 (Normal) |
Length | All | NBR 8269 - Table 6 (Normal) |
Remark: Other size by agreement. *
Produced according to Brazilian quality standards. Surely your company will find the best solution for your project.
Used in metal structures, civil and mechanical constructions, equipments, transportation, pallets and storage and others.
Produzido a partir de bobinas de aço
finas a quente, nas qualidades comercial,
estrutural CSN CIVIL 300 e conformados em
perfiladeiras contínuas no comprimento
padrão de 6.000mm ou no comprimento
ideal para o seu projeto.
Mechanical properties | HRC | HRC Medium Gauge |
---|---|---|
Yield Point (min) | 300 Mpa | 300 Mpa |
Tensile Strength (min) | 400 Mpa | 400 Mpa |
Elongation (min) | 25% (base 50) | 18% (base 200) |
Bendability 180° | 2T | 2T |
Source: CSN Catalogs.
Chemical compositionCarbon | 0,21% max. |
Manganese | 1,30% max. |
Phosphor | 0,030% max. |
Sulfur | 0,025% max. |
Silicon | 0,35% max. |
Aluminum | 0,015 min. |
Source: CSN Catalogs.
Dimensional CharacteristicsThickness (mm) | Size (mm) | Weight (KG / Piece) |
||
---|---|---|---|---|
Aba | Base | Aba | ||
2,0 | 25 | 50 | 25 | 8,83 |
30 | 68 | 30 | 11,52 | |
40 | 75 | 40 | 14,11 | |
40 | 100 | 40 | 16,51 | |
50 | 100 | 50 | 18,44 | |
2,25 | 25 | 50 | 25 | 9,83 |
30 | 68 | 30 | 12,85 | |
40 | 75 | 40 | 15,77 | |
30 | 92 | 30 | 15,44 | |
40 | 100 | 40 | 18,47 | |
50 | 100 | 50 | 20,63 | |
2,65 | 25 | 50 | 25 | 11,38 |
30 | 68 | 30 | 14,93 | |
40 | 75 | 40 | 18,37 | |
30 | 92 | 30 | 17,99 | |
40 | 100 | 40 | 21,55 | |
50 | 100 | 50 | 24,09 | |
50 | 127 | 50 | 27,53 | |
50 | 150 | 50 | 30,45 | |
3,00 | 30 | 68 | 30 | 16,70 |
40 | 75 | 40 | 20,60 | |
40 | 100 | 40 | 24,20 | |
50 | 100 | 50 | 27,10 | |
50 | 127 | 50 | 30,96 | |
50 | 150 | 50 | 43,28 | |
Standard Length | 6000 mm |
Source: CSN Catalogs.
Remarks: Other technical characteristics as per NBR 6355 Standards or specials on request.
Other special technical characteristics, on request.
For more information, please contact our nearest sales representative.
Utilizado em estruturas metálicas,
principalmente na formação de pilares
estruturais na construção civil.
Produced with hot-rolled steel coils, commercial or structural qualities as CSN CIVIL 300, cold formed in continuous forming lines, standard length of 6.000mm and customs cut length or other lengths on request.
Tickness (mm) | Lip | Flange | Depth | Weight (KG / Piece) |
---|---|---|---|---|
2,00 | 20 | 40 | 75 | 17,20 |
2,00 | 20 | 40 | 100 | 19,60 |
2,25 | 20 | 40 | 75 | 19,12 |
2,25 | 20 | 40 | 100 | 21,82 |
2,65 | 20 | 40 | 75 | 22,11 |
2,65 | 20 | 40 | 100 | 25,29 |
Standard Length | 6000 |
Source: CSN Catalogs.
Remarks: Other technical characteristics as per NBR 6355 Standards or specials on request.
Produzimos perfis especiais, formados
a frio e segundo a norma técnica brasileira
NBR 6355, mediante consulta enviada ao
nosso departamento comercial.
Perfis com dimensões fora do padrão
normal de mercado com aplicações
específicas na construção civil ou na
indústria. Confeccionados em aços
de qualidade comercial ou estrutural resistente a corrosão
atmosférica.
Laminados a quente ou zincados.
Characteristics | Minumum | Maximum |
---|---|---|
Thickness | 1,50 | 9,50 |
Length | - | 6000,00 |
Source: CSN Catalogs.
Note: Other on request*
Os perfis frisados são aplicados na
fabricação de portões de contrapeso
(portões de garagem), tapumes de obra,
fechamentos laterais, carcaças de
equipamentos, fachadas de prédios
entre outras aplicações possíveis.
Panatlântica produces the V-shaped profiles in various sizes and colors.
Thickness (mm) | Steel Quality |
---|---|
0,50 | Galvanized / CSN Galvalume/Prepainted |
0,75 | Cold Rolled |
0,80 | Hot dipped galvanized |
0,90 | Cold Rolled |
Source: CSN Catalogs.
Technical SpecificationsSheets | A | B | C | D | Peaks |
---|---|---|---|---|---|
1000 mm | 70 | 81 | 8X81 | 950 | 11 |
1200 mm | 84 | 81 | 10X81 | 1140 | 13 |
Source: CSN Catalogs.
For more information, please contact our nearest sales representative.
As chapas frisadas no modelo trapezoidal são uma exclusividade da Panatlântica e podem ser utilizados em portões de
contrapeso (portões de garagem),
tapumes de obras, fechamento laterais, carcaças de equipamentos e outros,
apresentando um novo padrão de friso que pode dar mais elegância e sofisticação à sua obra ou produto.
A Panatlântica produz perfis frisados tipo trapezoidal, com exclusividade, em
diversas medidas e cores.
Thickness (mm) | Steel |
---|---|
0,50 | Galvanied/ CSN Galvalume/Prepainted |
0,75 | Cold rolled |
0,80 | Hot dip galvanized |
0,90 | Cold Rolled |
Source: CSN Catalogs.
Technical SpecificationsSteel sheet | A | B | C | D | E | Peaks |
---|---|---|---|---|---|---|
1000 mm | 60 | 91 | 91 | 938 | 42 | 10 |
1200 mm | 60 | 91 | 91 | 1125 | 45 | 12 |
Source: CSN Catalogs.
See more about our product in our web catalog.
For both construction and residential coverage, as well as industrial and commercial installations of various sizes, today's construction techniques increasingly contemplate the use of galvanized or Galvalume steel, not only for its product properties (thermal insulation, service life, ease of installation, etc.), but also for its aesthetic and quality factors, every day more important.
Panatlântica provides high quality continuous trapezoidal steel sheets Shingles in Zinc Steel, CSN Galvalume and Pre-painted.
Allied to product quality, our TP-40 tile manufacturing process was certified by INMETRO.
Profile TP 40 can be used for walls and a classic roof sheet, due to a higher corrugation which are proper to roof drainage.
This profile may bear a slightly superior load than trapezoidal TP 25.
Mass (kg / Running meter) | ||||
Thickness (mm) | GALVANIZED | GALVALUME | Width (mm) | Useful Width (mm) |
0,43 | 4,13 | 3,60 | 1030 | 980 |
0,50 | 4,80 | 4,23 | 1030 | 980 |
0,65 | 6,24 | 5,92 | 1030 | 980 |
TP 25 tiles are widely used in side closures and facades due to their easy handling, good mechanical resistance and pleasant viewing profile.
Mass (Kg / Running meter) | ||||
Thickness (mm) | GALVANIZED | GALVALUME | Width (mm) | Useful width (mm) |
0,43 | 4,13 | 3,60 | 1057 | 1026 |
0,50 | 4,80 | 4,23 | 1057 | 1026 |
0,65 | 6,24 | 5,92 | 1057 | 1026 |
Note: Other thickness and colors under consultation.
By interfering directly with their useful life we do not recommend using them in the following situations, specially AlZn coated:
Consult our Sales Department for any questions regarding the application of Panatlântica Steel Tiles.
For commercial (industrial, architectural) buildings and residential construction applications. Today's construction techniques increasingly contemplate the successfully use of AlZn sheets for roofing in all kinds of environments around the world. Its mechanical properties and excellent atmospheric corrosion resistance in a wide range of environments under many diverse conditions, thermal insulation, aesthetics factors and significant life cycle cost savings over non-metallic systems are being discovered every day by architects, building owners and contractors.
Allied to the quality of the product, our process of manufacturing trapezoidal and corrugated sheets are certified by INMETRO.
Panatlântica is a reliable provider of corrugated steel sheets of high quality galvanized, , CSN AlZn Galvalume and Pre-painted steel. The profiles are cold formed on roller benders.
Theoretical Weight (Kg / metro linear) | ||||
Espessura (mm) | GALVANIZED | GALVALUME | Width (mm) | Useful Width (mm) |
0,43 | 4,13 | 3,60 | 1070 | 995 |
0,50 | 4,80 | 4,23 | 1070 | 995 |
0,65 | 6,24 | 5,92 | 1070 | 995 |
By interfering directly with their useful life we do not recommend using them in the following situations, specially AlZn coated:
Consult our Sales Department for any questions regarding the application of Panatlântica Steel Tiles.
It is very important to select the correct type of accessories for metal construction in order to ensure a strong and weather-tight building.
Complete your roofing project with accessories from Panatlântica which give your building both beauty and durability: they are manufactured to increase and improve the functionality and life performance of the metal roofs and walls. Add the finishing touch to your roofing with Panatlântica